Redeemers Group Before & After Photos

Check out this pool deck transformation Jacob and crew did for Tammy B. in Oakland, TN!  Her slab was sinking and caused a major tripping hazard!  We were able to lift and level the deck with our PolyLevel^TM concrete injection system and get rid of the tripping hazard.  Tammy and her family are now able to fully enjoy the pool without worry.  If you are having problems with your concrete, foundation, crawl space, or basement; call or click today for a free, no-obligation inspection!

Mike L. of Oakland, TN had grown increasingly frustrated with the condition of the concrete walkway leading from his driveway to the front door. Years of soil settlement had caused the slab near the garage corner to sink, creating a low spot where rainwater would routinely pool. This standing water forced Mike and his family to take a soggy detour through the yard just to enter their own home—an annoyance that had turned into a daily inconvenience, especially during wet weather.

During our inspection, Mike also pointed out some concerning movement in the back patio. The concrete there was beginning to settle and drift toward a steep drop-off at the rear of the yard. While we discussed the potential risks of continued movement and presented a full quote that included the walkway, patio, and even the driveway, Mike decided to start with the most immediate concern: the front walkway. This targeted approach allowed us to eliminate the water pooling problem while remaining within budget.

To restore proper grade and eliminate the hazard, we utilized PolyLevel®, an advanced polyurethane injection system designed to lift and level sunken concrete. The material expands underneath the slab to raise it gently but firmly into place, correcting the pitch and preventing water accumulation. We then sealed the joints and cracks using NexusPro®, a durable silicone-based sealant that keeps water out and protects against future erosion. The result was a level, safe, and dry walkway that instantly improved both the appearance and function of the entrance to Mike’s home.

Tired of tripping over sunken concrete or dodging puddles on your way inside? Contact us today to learn how PolyLevel® and NexusPro® can restore your concrete surfaces in Oakland, TN and beyond—fast, clean, and built to last.

When Chandra N. contacted us about her driveway, it was clear she takes immense pride in her home. Built in 2000 and carefully maintained over the years, her property reflects her commitment to quality and detail. But cracks throughout the entire driveway—and an additional side section extending to the house—were starting to detract from the clean look she’s worked hard to preserve. With a clear understanding of construction and a strong vision for her space, Chandra expected a solution that was professional, precise, and respectful of her experience.

Our team completed a full-surface driveway repair using our 3-part Concrete Protection System, designed to lift, seal, and protect. First, we used PolyLevel® to lift and stabilize any uneven sections. Then, NexusPro® was applied to seal the cracks with a flexible, long-lasting joint sealant. Finally, we finished with SealantPro®, a protective coating that shields the surface from moisture, chemicals, and future damage. This advanced system not only restored the appearance but extended the life of the entire driveway, including the small extension beside the house.

With no obstructions in the work area and easy street parking for our trucks, the job was completed efficiently. Chandra even joked that the noise might help scare off the moles in her backyard. Most importantly, she now has a driveway that matches the high standards she’s set for the rest of her home—without compromise.

Want a Driveway That Lasts?
Trust Redeemers Group to deliver smart, durable concrete solutions like PolyLevel®, NexusPro®, and SealantPro®. Contact us today to schedule your expert driveway inspection.

Jennifer R. of Dyersburg, TN experienced significant water intrusion in her crawl space during periods of rain, largely due to the natural slope of her lot. Water flowed from the garage side and front of the home toward the back and opposite side, leading to persistent moisture issues. Over time, this excess moisture contributed to mold growth throughout the crawl space, with clear evidence of water seeping through the foundation walls and vents. Concerned about the long-term impact on her home’s structural integrity and air quality, Jennifer sought a reliable solution to address these issues.

After a thorough assessment, we discussed a comprehensive encapsulation system, including the installation of two sump pumps to manage water infiltration. Additionally, we recommended LumberKote™, a specialized coating designed to treat and prevent mold growth. This approach aimed to create a drier, healthier environment while protecting the home from further water damage. Given that Jennifer had recently retired and was mindful of her budget, she carefully considered her options with the help of her father and brother, who played an active role in the decision-making process.

Ultimately, Jennifer chose to move forward with LumberKote™ as the first step in mitigating the mold issue. This cost-effective solution provided immediate protection while allowing her to plan for future upgrades, such as full encapsulation and sump pump installation. By taking proactive measures, she is safeguarding her home against further damage and ensuring a healthier living space.

If you need help with crawl space mold, call or click today for a free, no-obligation inspection.

Our crew installed 2500 square feet of CleanSpace to create a barrier under the home, added a dehumidifier to reduce the moisture content in the air, coated her joists with LumberKote (to stop any more damage from occurring to the structure,) AND fogged under the home to kill the existing mold.